Skip to content

The Arabian Option

Arab-built robotics and automation engineering for MENA industries.

We design, build, and deploy products, IoT systems, embedded hardware, and mechanical solutions. Engineered in Lebanon, delivered across the MENA region.

Our Services

What we build

Product development, IoT systems and mechanical design for companies and startups in Lebanon and across the MENA region.

Product Development

Have an idea for a physical or connected product? We take it from first concept to a tested prototype and files ready for manufacturing, with the electronics, firmware and mechanical design done by one team.

  1. 01Concept and product design
  2. 02Electronics and firmware
  3. 03Enclosure and mechanical design
  4. 04Prototype and testing
  5. 05Files ready for manufacturing

IoT Systems & Embedded Hardware

Sensor networks, firmware, custom PCBs, and real-time dashboards designed for field deployment.

Mechanical Design & Prototyping

CAD, FEA simulation, and 3D-printed prototypes for industrial components and custom enclosures.

Industrial Automation & SCADA

Control, monitor and improve your production line, without replacing the machines you already have.

Our Work

Built and tested

Systems we have delivered for clients, and the research builds behind our skills. Client names stay private.

units delivered
4units delivered
valves on one bus
96valves on one bus
sealed enclosures
IP66sealed enclosures
powered field nodes
Solarpowered field nodes
DeliveredAgriculture

Smart irrigation and field monitoring

A distributed IoT system that lets a grower check field conditions and open or close irrigation valves remotely. Field units report to a central hub, which uploads all telemetry to the AWS cloud. The cloud syncs with the client's mobile app, where the farmer sees live updates and schedules irrigation tasks.

What we did

  • Control and sensing design: sensor polling, data filtering and valve logic with safety conditions
  • Firmware for the hub, valve and sensing units, with the hub interfaced to the AWS cloud and tested end to end
  • Custom PCBs with protective circuits, including a new sensing board with room for more sensors
  • IP66 enclosures in PETG, with no fastener passing through the sealed body
  • Wiring diagrams, deployment procedures, in-house assembly and the print files so the client can make more units
  • ESP32
  • LoRa
  • RS-485
  • AWS cloud
  • Custom PCB
  • Enclosure design

The AWS cloud platform and the mobile app were built by partners. Creo interfaced the main hub with the cloud and tested it.

PAROL6 six-axis desktop robotic arm with a pneumatic gripper
Photo: PAROL6 by Source Robotics, GPLv3
Research buildRobotics R&D

PAROL6 six-axis robotic arm

We built and tested a PAROL6, Source Robotics' open-source six-axis desktop arm, to work through multi-axis motion, assembly and motor control on real hardware. We are preparing it for use in our future courses. It is internal research, not a product or a client deployment.

  • Mechanical build and assembly of the arm
  • Stepper and servo motor control
  • Kinematics and motion testing
  • Robotics
  • Motion control
  • Kinematics
How We Work

Our Process

Fast, structured, and engineering-first.

From initial scoping to deployment, each phase is designed to reduce risk and keep delivery momentum high.

  1. 01

    Scope

    A short call to understand the problem, the site, and what success looks like.

  2. 02

    Design

    System architecture, hardware selection, and full documentation before anything is built.

  3. 03

    Build

    Hardware assembly, firmware, enclosures, and bench testing.

  4. 04

    Deploy

    On-site installation, commissioning, and handover documentation.

About Us

The team behind Creo

Creo Engineering was started in Lebanon by Hasan Ismail and Mohammad Basharoush. Hasan works on automation, controls and electronics; Mohammad works on mechanical design and prototyping. Together they cover the whole system, so a client works with the same two engineers from the first call to installation.

Hasan Ismail (left) and Mohammad Basharoush (right) at the Lebanese Industry Expo, October 2026
Hasan · CEOMohammad · CTO

Co-founder & CEO

Hasan Ismail

Leads the business and the automation side: PLCs, SCADA and the electronics that connect machines to data.

B.E. Mechatronics, LAU · CSWP · N3uron Certified Integrator

LinkedIn ↗

Hasan is a mechatronics engineer. He runs Creo's commercial side and leads its automation and controls work. He designed the control and sensing system behind Creo's smart irrigation project, and his SCADA work covers solar and hybrid power plants.

Experience

  • Designed the control and sensing system for Creo's smart irrigation project, from valve logic to custom PCBs
  • SCADA for solar and hybrid power plants in Atvise and N3uron, over Modbus TCP, IEC 104 and OPC-UA
  • Telemetry tools for IMUs, UHF RFID readers and ultrasonic fuel-level sensors
  • PLC programming on Siemens S7-1200 and Allen-Bradley
  • PLC programming
  • SCADA / HMI
  • Embedded systems
  • PCB design
  • Industrial protocols
  • Electrical panels

Co-founder & CTO

Mohammad Basharoush

Leads technical delivery: mechanical design, prototyping and hardware built for the field.

M.S. Mechanical Engineering, LAU · CSWP · CSWPA Sheet Metal

LinkedIn ↗

Mohammad is a mechanical engineer whose research is in soft robotics. At Creo he leads technical delivery, from CAD and simulation to the enclosures, fixtures and prototypes that let electronics survive real conditions. He also teaches control systems at university level.

Experience

  • Designed the IP66 field enclosures for Creo's smart irrigation system
  • Led the mechanical design of a production machine built to run at 2,000 units an hour, which reached up to 4,500 in testing
  • Micrometer-precision machining fixtures and CNC toolpaths for organ-on-chip research
  • Co-first author of an AI-driven 3D-printed soft gripper paper at IEEE/ASME AIM 2025
  • SolidWorks
  • ANSYS FEA
  • Design for manufacturing
  • 3D printing
  • CNC / CAM
  • Soft robotics
FAQ

Common questions

Does Creo Engineering do IoT development in Lebanon?

Yes. We design and build IoT systems in Lebanon: sensors, custom PCBs, ESP32 firmware, LoRa, RS-485 and Wi-Fi links, and the dashboards on top. Our smart irrigation system, with a central hub, valve control, solar-powered field nodes and telemetry uploaded to the AWS cloud, is one example. We also work with clients across the MENA region.

Can you take a product from an idea to something we can manufacture?

Yes, that is our product development service. One team handles the product design, electronics, firmware, enclosure and prototypes, then hands over the CAD, drawings, PCB files and documentation needed to build it.

What mechanical design and product design work do you do?

Enclosures for electronics, including IP66-sealed housings, machine parts, fixtures, sheet metal parts and functional 3D-printed prototypes. We model in SolidWorks, check designs with ANSYS simulation and design each part for the process that will make it.

What do you do in-house, and what do you do with partners?

Design, firmware, prototyping and 3D printing are done in-house. PCB fabrication and assembly, CNC and laser cutting, and mobile apps or cloud backends are done with partners when a project needs them, and we say so in the proposal.

Can you automate or monitor machines we already have?

Yes. We add sensors, PLC logic and SCADA or HMI screens to existing production lines, so you can monitor and control them without replacing the machines.

Do you sign an NDA before discussing a project?

Yes. Send a short, general description first, and we can sign an NDA before you share the details.

Do you offer engineering courses?

Yes. Our first course, a hands-on prototyping course for small in-person groups, is coming soon. The courses page has the latest details.

How do we start a project with you?

Send a short brief through the contact form, on WhatsApp or by email. We reply to arrange a call, scope the work with you and then send a proposal.

Contact Us

Let's build your next system

Tell us what you’re working on. A short description of your problem, your site, and your timeline is enough to get started.